Model Number

003

A. Raw materials: PE80、PE100

B. Pipe range : Φ50mm－φ160mm

C. Pressure degree: SDR11，SDR17

D. Extruding capacity: 250～350kg/h

E. Using condition

l      Installed power: 235kw

l      Power: 3 phase, 380V，50Hz

l      Water consumption: 3.5m³/ h, 0.15－0.2Mpa, water temperature≤15℃

l      Gas consumption: 0.4 m³/ min, ≥0.6Mpa

FEATURE & FUNCTION

The screw of the extruder is equipped with barrier unit and mixing structure, and the barrel owns new style    grooves. All of these offer good plastification and mixing effect. Special design of basket die head for HDPE(PP,ABS) large diameter pipe with thick wall offer lower melting temperature, good mixing, lower pressure of cavity, and stable production.

Special design for sizing and cooling system by using film and water ring to cool HDPE(PP,ABS) material, which can fit for the requirement of HDPE(PP,ABS). And the design can ensure the stability of diameter and roundness when producing the pipe with thick wall.

Special design vacuum sizing tank can ensure the stability of size and roundness. Speed controllers are used in extruder, haul-off to offer stability and precision.

The whole line adopts PLC control system and large liquid crystal screen, which makes the operation very   convenient. The line can be equipped with another extruder used for extruding the mark line.